How to Choose the Correct Stainless Steel Sheet?

Stainless-Steel-410-SheetPlates_banner

How to Choose the Correct Stainless Steel Sheet?

If you come to know that your DIY project requires a small element of stainless steel, you have three main decisions right in front of you! And you need to select one out of them depending on your need.

Great Steel and Metals, the stainless steel 410 sheet and plates stockist in India is providing the tips to select the proper element that suits your needs.

The first two important factors in using stainless steel sheet are corrosion and staining. However, this is not the case too; it can corrode and can also cause staining. But in most of the times, its resistance to corrosion as well as staining will be quiet sufficient.

Stainless-Steel-410-SheetPlates_banner

Also there exists another misconception. According to it, most people call anything over 3mm thickness as sheet but in normal terms, it is called as plate. So if you are searching for anything over 3mm thickness, it is actually stainless steel plate and not stainless steel sheet.

Step One – Grades.

Out of all grades, grades 304 and 316 are most known and the latter is preferred above 304 if the application is in corrosive environment such as salt water. While 304 as well as 316 suffer pitting and crevice corrosion, the 316 suffers lesser corrosion.

Grade 316 comes as a”food grade”,and finds its usage at places where food products are being handled. Now, is you keep searching for a stainless steel sheet as a splash back, you can save money by using grade 304 as it won’t come into actual contact while food preparation.

Step Two – Thickness

The thickness of a sheet widely ranges between 0.4mm and 2.5mm. The size thinner than 0.4 would is called as foil while that more than the 3mm thickness would mean as a plate.

Also the Stock standard dimensions of a 0.4mm up to 0.9mm thick sheet have been defined as either 2000mm X 1000mm or 2500mm x 1250mm.

Further, for those sizes ranging between 0.4mm and 2.5mm, you can find a 3000mm X 1500mm size available. Once you have the right thickness and grade for your project, you can have your stainless steel sheet custom cut.

Now, you can use either a guillotine, laser cutter, or waterjet cutting machine to ensure you cut some very complex shapes with precision accuracy.

Step Three – Finish

One you know the application, you can decide on what finish your sheet should be on. The manufacturing processes involve the rolling down of these sheets to correct sizes which are then annealed and then passed through the polished rollers.

Hence one can accept as many finishes as they want and the most popular one among them is the brushed finish.

it contains several fine lines or scratches, which run in the same direction. While the Satin finish gets produced by soft brush-scratching,it also produces a slight sheen. A mirror finish comes as and when the sheet becomes highly polished and reflective.

At times, you need to apply a plastic coating is applied to either one or both sides of the sheet to protest the stainless steel sheet’s surface.

By this time, you might be clear what you want; either a full size stainless steel sheet or a custom-cut for your business or home!

Get the premium quality stainless steel sheets from the leading stainless steel seamless pipes stockiest (مواسير ستانلس ستيل في المخزون )  Great Steel and Metals.