background

ASTM A276 Round Bar

Hot Rolled/ Cold Drawn ASME SA 276m Rod and Hex Bar manufacturer in India

ASTM 276 is a specification for cold finished or hot finished steel bars. These bars cannot be reforged. There are 300 series and 400 series of standards in this particular grad. We produce different shapes, sizes and standards of the material. ASTM A276 Threaded Rod is used in applications which require the rods to be installed via threading.


ASTM A276 Round Bar

ASTM A276 Round Bar

ASME SA276 Stainless Steel Bar

ASME SA276 Stainless Steel Bar

ASME SA 276m Rod

ASME SA 276m Rod


Most trusted and reliable ASME SA 276m Rod and ASTM A276 Flat Bar stockholder and supplier in India

The ASTM A276 Stainless Steel Bar can come in different conditions as well. There are A, B, H and T conditions of the bar. The Stainless Steel Round Bar ASTM A276 condition A is annealed, B is severe cold worked, H is hardened and tempered whereas the T condition is hardened and tempered at high temperatures. There is also condition S which is strain hardened and light cold worked. The ASTM A276 Flat Bar is used in structural applications such as construction industries. The ASTM A276 Type 410 is used in applications with mild corrosion and heat resistance. It contains 11.5% chromium in its content. The ASTM A276 Type 316 his superior creep resistance and it is used in corrosive chemical applications. ASTM A276 Type 420 has slightlyhigher chromium content at 12% and the martensitic stainless steel is used in high wear and tear applications. The ASME Sa276 Stainless Steel Hex Bar can be used in a range of applications for its high machining capacity. Great Steel & Metals is a manufacturer and supplier of A276 grade steel products. You can get a full list of products and prices by contacting us.


Table of contents

Specification of ASTM A276 Round Bar

View Stainless Steel Round Bar ASTM A276 and ASME SA276M Rod tolerances in mm, dimensions, sizes, thickness chart, and weight

ASTM A276 ASME SA 479 Round bar size Diameter: 3-~800mm
ASTM A276/ ASME SA-276 Hex Bar size 2-100mm A/F
ASTM A276 ASME SA479 en 1.4401 Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
ASME SA276 Square bar size 4 to 100mm
SA276 ASME Angle bar size (in mm) 3*20*20~12*100*100
SA 276 Section 3.0 to 12.0mm thickness
SA276 Channel Bar (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
ASTM A276 Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
A276 ASTM Billet Size 1/2″ to 495mm Diameter
ASME A276 Rectangles Size 33 x 30mm to 295 x 1066mm
ASTM A276/ ASME SA-276 Round Bar Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
SA 276 ASME Round Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
ASTM A276 Round Bar Condition Hardened & tempered, annealed
A276 Bar Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
ASME SA 276 Round Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
ASTM A276 Bar Processing Bar cutting to 650mm

Types of ASTM A276 Round Bar

A276 ASME Round Bar

A276 ASME Round Bar

ASTM A276 ASME SA 479 Hex Bar

ASTM A276 ASME SA 479 Hex Bar

ASTM A276/ ASME SA-276 Flat Bar

ASTM A276/ ASME SA-276 Flat Bar

ASTM A276 ASME SA479 en 1.4401 Rod

ASTM A276 ASME SA479 en 1.4401 Rod

ASME SA276 Rounds

ASME SA276 Rounds

SA276 ASME Bar Material

SA276 ASME Bar Material

SA 276 Annealed Bar

SA 276 Annealed Bar

SA276 Square Bar

SA276 Square Bar

ASTM A276 Bright Bar

ASTM A276 Bright Bar

A276 ASTM Polished Bar

A276 ASTM Polished Bar

ASME A276 Black Bar

ASME A276 Black Bar

ASME SA 276 Round Bar Cold Drawn

ASME SA 276 Round Bar Cold Drawn

SA 276 ASME Flat Bar Hot Rolled

SA 276 ASME Flat Bar Hot Rolled

ASTM A276 ASTM a479 Round Bar Hot Rolled

ASTM A276 ASTM a479 Round Bar Hot Rolled

A276 Square Bar Hot Rolled

A276 Square Bar Hot Rolled

ASTM A276 Flat Bar Cold Drawn

ASTM A276 Flat Bar Cold Drawn


ASME SA276 Round Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

ASME SA276 Round Bar finishes

SA276 ASME Round Bar Surface finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

A276 ASME Round Bar Uses

Searching PED approved ASTM A276 Stainless Steel Bar Manufacturer? Wide stock of ASME SA276 Threaded Rod in Mumbai warehouse
A276 ASME bright bar used for Automobile Industries to make nuts, bolts, shafts Heavy engineering Industries
Textile industry ASTM A276 ASME SA 479 bright bar used for Electric pumps / motors
Railway engines and coaches ASTM A276/ ASME SA-276 Round Bar to making arms and ammunition
ASTM A276 ASME SA479 en 1.4401 Round Bar for manufacturing gears, bearings, and hinges ASME SA276 Round Bar to produce Cold headed components
SA276 ASME Round Bar to manufacturing conveyor shafts A276 ASME Rod are also used in Agricultural sector

ASME SA 276m Rod Sizes

Type SIZES (mm) SIZES (Inches) ISO Tolerance
A276 ASME Cold Drawn and Polish Round Bar 3.00 – 75.00 1/8″ – 3.00″ h8-h9-h10-h11
ASTM A276 ASME SA 479 Cold Drawn and Ground Bar 10.00 – 75.00 5/6″ – 2.50″ h8-h9-h10-h11
ASTM A276/ ASME SA-276 Peeled and Polished Round Bar 40.00 – 150.00 1.50″ – 6.00″ h11, h11-DIN 1013
ASTM A276 ASME SA479 en 1.4401 Peeled and Ground Bar 20.00 – 50.00 3/4″ – 2.00″ h9-h10-h11

A276 ASME Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

The sizes of A276 ASME Bars can also be selected when using the THD model.

Size & Dimensions of ASTM A276 Round Bar
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

ASTM A276 Round Bar Tolerances

Never forget to compare our price with other ASTM A276 Round Bar Manufacturer In India, best quality and lowest price of Hot Rolled/ Cold Drawn ASME SA276M Rod
Tolerances for Cold Drawn SA276 ASME Round Bar
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100		 + 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
Flat (thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.250
+ 0 to – 0.350
Flat (width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.190
+ 0 to – 0.220
+ 0 to – 0.350
+ 0 to – 1.00
+ 1.00 to – 1.00
Square and
hexagon		 ≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105		 + 0 to – 0.090
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.250

Tolerances of Turned SA 276 Round Bar (BS 970-3)

Turned ASTM A276 Round Bar Tolerances
ASTM A276 Round Bar Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400		 + 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
+ 0 to – 0.160
+ 0 to – 0.185
+ 0 to – 0.210
+ 0 to – 0.230
+ 0 to – 0.250

Tolerance of Precision SA276 Round Bar (BS 970-3)

Precision ASTM A276 Round Bar Tolerances
Section Size,
diameter		 Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

Tolerance Chart of A276 ASME Bright Round Bar (BS EN ISO 286-2 )

ASTM A276 Round Bar Tolerance ISO “H” Series in MM
NOMINAL SIZE p h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

SA276 ASME Round Bar for Sale

A276 Square Bar A276 ASTM Polished Flat Bar
SA276 Rectangular Bar Cold Drawn ASME SA 276 Polished Square Bar
A276 ASTM Rectangular Bar stock ASTM A276 ASTM a479 Polished Bar Stock
ASTM A276 Square Bar Black A276 Black Bar
ASME SA 276 Hex Bar Cold Drawn SA 276 Triangular Bar
A276 ASME Square Bar Bright ASTM A276 Bright Bar Cold Drawn
ASTM A276 ASME SA479 en 1.4401 Square Bar Annealed ASTM A276/ ASME SA-276 Bright Bar Flat
ASME SA276 Rectangular Bar Black ASTM A276 ASME SA479 en 1.4401 Bright Bar Hex
ASTM A276 Hex Bar Black ASTM A276 ASME SA479 en 1.4401 Square Rod
SA276 ASME Rectangular Bar Bright ASME SA276 Bright Bar Hollow
SA 276 Rectangular Bar Polished ASME A276 Polished Round Bar
SA276 ASME Threaded Bar M12 ASTM A276 Threaded Bar Stock
SA 276 Threaded Bar M16 A276 ASME Threaded Rods

ASTM A276 Round Bar Supplied in following projects

Location Project
Timor Sea, offshore Timor-Leste and Australia Kitan Oil Field
North Sea, Denmark Tyra Gas Field Redevelopment
Offshore Abu Dhabi, UAE Bu Haseer Oil and Gas Field, Abu Dhabi
Nigeria Ikike Oil Field
Greater Ekofisk Area, North Sea Lingshui 17-2 Gas Field