Stainless Steel Pipe Flanges & ASTM A182 Flange Supplier
Great Steel & Metals is a Stainless Steel Pipe Flanges Manufacturer with a wide range of products and steel grades. There are different types of flanges. A flange is a type of fitting that allows two parts of in a system to be connected together. There are different shapes and types of flanges, each having its own need and demand in the product line.
Stainless Steel Flanges
SS Pipe Flange
ASTM A182 Flange
Stainless Steel Plate Flanges
ASTM A182 Slip on Flanges
ANSI 150 Stainless Steel Flanges
Buy SS Flange Material, SS ASTM A182 Flange & Stainless Steel Blind Flanges at best price in India
The Stainless Steel Blind Flange is a blind ending flange which is used to terminate a piping line at the end of a connection. There are flanges that need to allow the pipes to go through them and these are called the Stainless Steel Slip On Flange types. They are useful to connect seamless pipes together without damaging the pipes and to hold them tight. The ASTM A182 Stainless Steel Orifice Flanges are usually used in metered connections of fluid where the volumetric flow rate could be calculated. They are often used in pairs and are called the orifice flange union. Our Stainless Steel Flanges Dimensions range widely with the grade of steel, type of flange and the nominal diameter of the piping system. We offer our customers a range of selection with slip on, blind, weld neck, orifice and other types of flanges. The Stainless Steel Weld Neck Flange Weight is usually higher than the other types because of the additional welded neck which makes the connection stronger but also heavier. The ANSI B16.5 Stainless Steel Spectacle Blind Flange is used for medium radius pipe connection ends. Great Steel & Metals is a specialist in flanges and supply all kinds of stainless steel flanges.
Table of contents
- Stainless Steel Flanges price list
- AWWA Stainless Steel Pipe Flange Specification
- Types of Stainless Steel Flanges
- Stainless Steel Blind Flanges Standards
- ASTM A182 Flange Equivalent
- ANSI 150 Stainless Steel Flanges Properties
- Stainless Steel Class 150 Flanges Chemical Composition
- SS Pipe Flange Dimension & Weight Chart
- We Maintain Stock Of SS Pipe Flange
- We Export Stainless Steel Slip On Flanges To Following Location
Stainless Steel Flanges price list
| SS Pipe Flange Price List |
Stainless Steel Screwed Flanges Per Unit (INR) |
SS ASTM A182 Flange(UAE Dirham) | Ss Flange Material (Saudi Riyal) |
|---|---|---|---|
| Flanges SS A 182 Gr F304/304l Flg Wn 150 Rf 304/304l Ss Ios Bore Item Flange-weld Neck-asme Class(35pcs) | 323 | 16.69 | 17.05 |
| SS Seamless Butt Welded Flange / Fittings (Pipe Fittings) Grade 904l | 1,336 | 69.05 | 70.53 |
| Flanges SS A 182 Gr F304/304l Flg Wn 150 Rf 304/304l Ss Ios Bore Item Flange-weld Neck-asme Class(59pcs) | 385 | 19.90 | 20.32 |
| Flange SS Gr Sa182 F316 Ansi B16.5 Dn 20, 300#sch 40s, Weld Neck Rf (12pcs) | 476 | 24.60 | 25.13 |
| Flanges SS A 182 Gr F304/304l Flg Wn 150 Rf 20b462 40/s Bore Item Flange-type-weld Neck (3pcs) | 811 | 41.92 | 42.81 |
| Flange SS Gr Sa182 F316 Ansi B16.5 Dn25,150#sch10s, Weld Neck Rf (60pcs) | 487 | 25.17 | 25.71 |
AWWA Stainless Steel Pipe Flange Specification
Check sizes and specification of Stainless Steel Plate Flange, SS Weld Neck Flange
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| Martensitic Stainless Steel Flange Standard EN |
|
| SS Flanges Standard DIN |
|
| Chromium Stainless Steel Flanges Standard JIS |
|
| Austenitic SS Flanges Standards |
|
| Ferritic Stainless Steel Flanges Standard ANSI |
|
| SS Flanges Standard UNI |
|
| ASME B16.5 Stainless steel Flange size range | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Chromium Nickel Stainless Steel Flange supporting material | Gasket, Ring Joint, Flange Bolts |
| Austenitic and Ferritic Stainless Steel Flanges Production technique |
|
| Manufacturer of | Stainless steel Forged / Threaded / Screwed / Plate Flange |
| Austenitic Chromium Nickel SS Flange Test | X-ray detector, Direct-reading Spectrograph, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector |
| Equipment for ASTM A182 SS Flange | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Types of Stainless Steel Flanges
Chromium Nickel SS Flange SORF
Chromium Stainless Steel Flange SWRF
Ferritic Stainless Steel Flange WNRF
Austenitic Stainless Steel Flange BLRF
Ferritic Stainless Steel grade Flange Exhaust
Austenitic Stainless Steel grade Flange Girth
Stainless Steel Flange Lap Joint
SS Flange Long Weld Neck
Austenitic and Ferritic SS Flange Orifice
Super Austenitic Stainless Steel Plate Flange
Martensitic Stainless Steel RTJ Flange
Austenitic Chromium Nickel SS Flange Spectacle
Martensitic SS grade Flange Square
ASTM A182 Stainless Steel Flange Threaded
Super Martensitic SSl Flange Anchor
Super Ferritic Stainless Steel grades Flange Blank
Stainless Steel Plate Flanges
Stainless Steel Slip On Flanges
Stainless Steel Blind Flanges
Stainless Steel Threaded Flanges
Stainless Steel Socket Weld Flanges
Stainless Steel Orifice Flanges
Stainless Steel Screw Flanges
Stainless Steel ANSI 150 Flanges
Stainless Steel Blind Flanges Standards
View Stainless Steel Forged Flanges & ANSI 150 Stainless Steel Flanges price per meter ex. Mumbai
| ASME B16.5 Stainless Steel Flanges | EN TYPE | DIN |
|---|---|---|
| WN – Welding Neck | EN-TYPE 11 | DIN 2631 DIN 2632 DIN 2633 DIN 2634 DIN 2635 |
| BL – Blind | EN-TYPE 05 | DIN 2527 |
| SO – Slip On | EN-TYPE 01/12 | |
| LJ – Lap Joint | EN-TYPE 02/04 | DIN 2641 DIN 2642 DIN 2655 DIN 2656 |
| SW – Socket Weld | EN-TYPE 14 | |
| THR – Threaded | EN-TYPE 13 | DIN 2566 |
| LWN – Long Welding Neck / Integral | EN-TYPE 21 | |
| Welding Collars | EN-TYPE 32/34 | |
| SS Flat Flange for Welding | DIN 2573 DIN 2576 |
|
| Stainless steel Lap Joint Short Stub End | DIN 2673 | |
| Chromium Nickel SS Orifice Flanges, Chromium SS Swivel Flanges, Spades, Spacer Rings Ferritic SS Spectable Blinds, API 6A, JIS B2220, VSM, NFE, BS10/BS4504, GOST |
||
Ferritic Stainless Steel Flange Standards / Types and Pressure Class :
| ASME/ANSI B 16.5 | Chromium Nickel SS Welding Neck Flanges, Socket Weld Flanges, Slip on Flanges, Blind Flanges, Lap Joint Flanges, Threaded Flanges, High Hub Blind Flanges, Ring Type Joint Flanges |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.36 | Chromium SS Threaded Flanges, Welding Neck Flanges, Slip on Flanges (SORF) |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Ferritic SS Weld Neck Flanges, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| BS 4504 SEC 3.1 | AusteniticSS Hubbed Threaded Flanges, Welding Neck Flanges, Blank Flanges, Hubbed Slip on Flanges, Lapped Pipe End Flanges, Plate Flanges, Loose Plate Flanges, Loose Plate With Weld Neck Flanges |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 1560 BOSS | Ferritic SS grade Slip-On Flanges, Welding Neck Flanges, Socket Welding Flanges, Blind Flanges, Lapped Flanges, Screwed Boss Flanges |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Austenitic SS grade Blind Flanges, Welding Neck Flanges, Plate Slip-On Flanges, Screwed Boss Flanges, Slip-On Boss Flanges |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
| BS 4504[PART 1] | Stainless Steel Loose Plate With Weld On Plate Collar, Welding Neck Flanges, Hubbed Slip-On Hubbed Threaded, Plate Flanges, Blank Flanges |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
ASTM A182 Flange Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
| SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
| SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
| SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
| SS 321 | 1.4541 | S32100 | SUS 321 | – | – | – | X6CrNiTi18-10 |
| SS 321H | 1.4878 | S32109 | SUS 321H | – | – | – | X12CrNiTi18-9 |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | X12Cr13 |
| SS 446 | 1.4762 | S44600 | – | – | – | – | – |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
ANSI 150 Stainless Steel Flanges Properties
| Type | UNS | Tensile (ksi) min |
Yield (ksi) min |
Elongation min |
Hardness (Brinell) max |
Hardness (Rockwell B) max |
|---|---|---|---|---|---|---|
| 302 | S30200 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304* | S30400 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304L* | S30403 | 70 | 30 | 40% in 2″ | 183 | 88 |
| 309 | S30900 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 309S | S30908 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310 | S31000 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310S | S31008 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316* | S31600 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316L* | S31603 | 70 | 25 | 35% in 2″ | 217 | 95 |
| 317 | S31700 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 317L | S31703 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 321 | S32100 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 347 | S34700 | 75 | 30 | 40% in 2″ | 183 | 88 |
Stainless Steel Class 150 Flanges Chemical Composition
| Type | C | Mn | P | S | Si | Cr | Ni | Mb |
|---|---|---|---|---|---|---|---|---|
| 302 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 17.00/19.00 | 8.00/10.00 | – |
| 304* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/10.50 | – |
| 304L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/12.00 | – |
| 309 | 0.20 | 2.00 | 0.045 | 0.030 | 1.00 | 22.00/24.00 | 12.00/15.00 | – |
| 309S | 0.08 | 2.00 | 0.045 | – | 1.00 | 22.00/24.00 | – | – |
| 310 | 0.25 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 316* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 316L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 317 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00/1.00 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 317L | 0.03 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 17.00/19.00 | 9.00/12.00 | 0.75/0.75 |
| 347 | 0.08 | 2.00 | 0.040 | 0.030 | 0.5/1.00 | 17.00/19.00 | 9.00/12.00 | 0.5/0.75 |
SS Pipe Flange Dimension & Weight Chart
PED approved Stainless Steel Class 150 Flanges supplier in India, AWWA Stainless Steel Flanges available in many sizes
Dimensions: ANSI/ASME B16.5, B16.28, MSS-SP-43.
| Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
We Maintain Stock of SS Pipe Flange
| Flange Schedule/Class | Pipe Size - Pipe Flange | Flange Connection Type | Max. Pressure |
|---|---|---|---|
| ASME B16.5 Class 150 | 1/2" | FNPT | 150 psi |
| ASME B16.5 Class 150 | 1/2" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 1/2" | Welded | 150 psi |
| ASME B16.5 Class 150 | 3/4" | FNPT | 150 psi |
| ASME B16.5 Class 150 | 3/4" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 1-1/4" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 1-1/2" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 2" | FNPT | 150 psi |
| ASME B16.5 Class 150 | 2" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 2-1/2" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 3" | Socket Weld | 275 psi |
| ASME B16.5 Class 150 | 4" | FNPT | 150 psi |
| ASME B16.5 Class 150 | 4" | Socket Weld | 275 psi |
| ASME B16.5 Class 300 | 1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1-1/4" | FNPT | 720 psi |
| ASME B16.5 Class 300 | 1-1/4" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1-1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 1-1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 2-1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 2-1/2" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 3" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 3" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 4" | Slip On | 720 psi |
| ASME B16.5 Class 300 | 4" | Slip On | 720 psi |
We export Stainless Steel Slip on Flanges To Following Location
| Location | Project |
|---|---|
| Canada | Bay du Nord Project |
| Israel | Karish and Tanin Field Development, Mediterranean Sea |
| North Sea, Norway | Troll Phase Three Development, North Sea |
| North Sea, UK | Arran Gas Field, North Sea |
| UK | Cambo Oil Fiel |