ASME B16.49 3D/ 5D Bends manufacturer in India
Stainless steel pipe bends are part of the pipe fittings made for stainless steel piping. The fittings are used to connect pipes and other fittings together when necessary. There are different types of fittings and the bend is one of them. There are long radius bends and short radius bends. As a Stainless Steel Long Radius Bend Manufacturer we manufacture all grades of long radius bends.
Buy directly from Mss Sp-43 Pipe Bend manufacturer in India, Check Ss Hot Induction Bend dimensions & weight chart
A bend is used change the direction of the piping. The SS 3D Bend can change the direction of pipe line in a three dimensional space along two or three different axis. There are different types and standards of the bends. The ASME B16.9 Pipe Bend can range from nominal sizes ½ inches to 48 inches and is used in fluid flow systems to clean up the system. There are different pressure classes for the bends as they have to be aligned with different product sets. The Schedule 10 Stainless Steel Pipe Bends can withstand pressure classes 150 through 2500. The different pressure classes and standards make the bends to be used in different applications. The ANSI B16.9 Stainless Steel Exhaust Pipe Bends are used in exhausts. There are Stainless Steel Pipe Fittings Bends of all sizes produced by us. Great Steel & Metals is a leading manufacturer of bends of various types such as the Stainless Steel Steam Pipe Bends and others. Depending on the need of our customers, we can produce custom made products as well. You welcome to contact us for any inquiries.

Stainless Steel Pipe Bend

Ss Long Radius Bend

Ss Astm B16.9 Piggable Bend
Table of contents
- Stainless Steel Long Radius Bend Equivalent Length
- ASME B16.49 3D bends Equivalent Length
- Stainless Steel Tube Bend
- Degrees of Stainless Steel Pipe Bends
- ASME B16.49 3D bends Radius
- SS Pipe Bends Applications
- 16 Gauge Ss Bend Radius
- Dimensions of Stainless Steel Tube Bend
- Standards of Stainless Steel Pipe Bends
ASME B16.49 3D bends Equivalent Length
Stainless Steel Pipe Fitting Bends | Rigid PVC/HDPE e = 0.005 mm |
GRP/FRP e = 0.02 mm |
Commercial Steel e = 0.05 mm |
Spiral Weld Steel e = 0.1 mm |
---|---|---|---|---|
Threaded Stainless Steel Pipe Bends | ||||
90° elbow, r/d=1 | 37 | 34 | 30 | 26 |
45° elbow, r/d=1 | 20 | 18 | 16 | 14 |
Welded Stainless Steel Pipe Bends | ||||
90° elbow, sharp bend | 69 | 63 | 55 | 49 |
90° elbow, r/d=1 | 23 | 21 | 19 | 16 |
90° elbow, r/d=1.5 | 17 | 15 | 13 | 12 |
90° elbow, r/d=2 | 14 | 13 | 11 | 10 |
45° elbow, sharp bend | 22 | 20 | 18 | 16 |
45° elbow, r/d=1 | 17 | 16 | 14 | 12 |
45° elbow, r/d=1.5 | 12 | 11 | 9.4 | 8.3 |
SS Pipe Bend Equivalent Length
First compare our price of Stainless Steel Pipe Bend with other Manufacturer India, you will find better price & quality of from SS Steam Pipe Bends 1/2 in. to custom sizes
Buy from us Bending Stainless Steel Tubing. Stainless Steel Pipe Bends Suppliers in India, Purchase Stainless Steel Pipe Bend with or without tangents.
Grades of Stainless Steel Tube Bend:
- Stainless Steel 304 Pipe Bends
- SS 304L Pipe Bends
- Stainless Steel 304H Pipe Bends
- Stainless Steel 310 Pipe Bends
- Stainless Steel 316 Pipe Bends
- SS 316L Pipe Bends
- Stainless Steel 316H Pipe Bends
- Stainless Steel 316Ti Pipe Bends
- Stainless Steel 317 Pipe Bends
- Stainless Steel 347 Pipe Bends
- Stainless Steel 904L Pipe Bends
SS Pipe Bends Outer Diameter | 38.0 mm – 206.0 mm |
Stainless Steel Pipe Bends Wall Thickness | 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request |
SS Pipe Bends Bend Radii | 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm |
Steel Pipe Bends Bending radius (R) | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom bend |
SS Bend Standard | ASME/ ANSI B16.9, ASME/ ANSI B16.49 / ASME/ ANSI B16.28, MSS-SP-75, MSS SP-43, DIN 2605, GOST 17375, GOST 30753, ISO 15590-1, EN 10253-4 Type A, EN 10253-4 Type B |
Stainless Steel Pipe Bends Specifications | ASTM A403 & ASME SA403 |
SS Pipe Bends Size |
|
Stainless Bend Radius & Bending angle (θ) | 15°, 30°, 45°, 60°, 90°, 135°, 180° |
Stainless Steel Pipe Bends End | ASME B16.9 / B16.49; BE |
Stainless Bend Connect method | Butt welding |
SS Pipe Bends manufacturing technique | Induction |
Specialized manufacturer of |
|
Sizes in stock |
|
Facilities for Stainless Steel Pipe Bends |
|
Stainless Steel Pipe Bends Testing Facility |
|
R=1.5D Seamless Pipe Bend Schedule | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
Stainless Steel Pipe Bends Finish | Finished pickled, 2b finish, #8 finish, 180 grit finish, #4 finish ra |
Bending set | R300, R50 |
SS Bend Certification | ASME, ANSI, DIN, JIS, BS, API, Ce, En |
Stainless Steel Pipe Bends Third Party Inspection |
|
R=1.5D Seamless Pipe Bend Mill specification | MESC SPE 74/002 2018 , MESC SPE 76/200 2018, EN 10204 -3.1, ISO 10474 -3.1 |
Types of Stainless Steel Tube Bend

ASTM A403 Steel Piggable Bend

Stainless Steel Long Radius Bend

ASTM A403 SS Seamless Pipe Bend

SS Hot Induction Bend

ASTM A403 Stainless Steel U Pipe Bend

Stainless Welded Pipe Bend

A403 SS Mitered Pipe Bend

ANSI B16.9 SS J Bend

Stainless Steel 5D Pipe Bend

ASME B16.49 Stainless Steel 3D Pipe Bend

Stainless Steel Pipe Bends

A403 Stainless Steel 10D Pipe Bend

A403 Steel 45 Degree bend

SCH 10s 5D SA403 Stainless Steel Bend

ASME SA403 Stainless Steel Return Bend

ASME B16.49 SS 90 Degree bend

Stainless Steel Swept Bends

ASME SA403 Steel S Bend

Stainless Steel Tubing Bends

SS Long Bend
Degrees of Stainless Steel Pipe Bends
- 10° Pipe Bend
- 11° Pipe Bend
- 11 1/4 bend
- 22° Pipe Bend
- 22 1/2° bend
- 180° Pipe Bend
- 22.5° Pipe Bend
- 15° Pipe Bend
- 30° Pipe Bend
- 45° Pipe Bend
- 60° Pipe Bend
- 65° Pipe Bend
- 80° Pipe Bend
- 90° Pipe Bend
- 120° Pipe Bend
- 135° Pipe Bend
ASME B16.49 3D bends Radius
Stainless Steel Pipe Bends Bending radius (R): R=3D, 4D, 5D, 6D, 7D, 8D, 9D, 10D
Ss Bend Radius (Bend radii) and SS Minimum Bend Radius are limited as mentiond in below table, It is determined by the equipment and tooling combinations available to the Stainless Steel Bend manufacturer
Stainless Steel Pipe Bends radius chart
Pipe Bend Base Material & Thickness | Stainless Steel Minimum Bend Radius Includes Minimum Closeness of Cutout to Bend |
Stainless Bend Radius (Refers to Inner Radius) |
---|---|---|
Cold Rolled – 14 gauge ( 0.075″ | 1.91mm ) | 0.415″ | 0.07″ |
Cold Rolled – 16 gauge ( 0.060″ | 1.52 mm ) | 0.33″ | 0.05″ |
Cold Rolled – 18 gauge ( 0.048″ | 1.22 mm ) | 0.265″ | 0.05″ |
Cold Rolled – 20 gauge ( 0.036″ |0.91 mm ) | 0.18″ | 0.04″ |
Galvanneal – 16 gauge ( 0.064″ |1.61 mm ) | 0.288″ | 0.05″ |
Galvanneal – 18 gauge ( 0.052″ |1.32 mm ) | 0.26″ | 0.05″ |
Galvanneal – 20 gauge ( 0.040″ |1.01 mm ) | 0.2″ | 0.05″ |
Stainless Steel – 14 gauge ( 0.078″ | 1.98 mm ) | 0.351″ | 0.078″ |
Stainless Steel – 16 gauge ( 0.063″ | 1.59 mm ) | 0.285″ | 0.05″ |
Stainless Steel – 18 gauge ( 0.050″ | 1.27 mm ) | 0.25″ | 0.045″ |
Stainless Steel – 20 gauge ( 0.037″ | 0.94 mm ) | 0.23″ | 0.04″ |
Aluminum 5052-H32 – ( 0.040″ | 1.02 mm ) | 0.18″ | 0.04″ |
Aluminum 5052-H32 – ( 0.051″ | 1.30 mm ) | 0.255″ | 0.04″ |
Aluminum 5052-H32 – ( 0.064″ | 1.63 mm ) | 0.32″ | 0.04″ |
Ss Bend Radius (Bend radii)
- 2.5D Pipe Bend
- 3D pipe bend
- 4D pipe bend
- 5D pipe bend
- 6D Seamless Pipe Bend
- 7D pipe bend
- 8D Seamless Pipe Bend
- 9D pipe bend
- 10D pipe bend
- 12D pipe bend
- 22D pipe bend
Stainless Steel Pipe Bends suppliers price in India
Check dimensions and specification of MSS Sp-75 Hot Induction Bend and Buy Schedule 10 Stainless Steel Pipe Bends at best price ex Mumbai
Stainless Steel Pipe Bends | Ss Long Radius Bend Price List(INR) | Ss Astm B16.9 Piggable Bend Price (UAE) | Mss Sp-43/ Sp-75 Pipe Spool Price (Saudi Riyal) |
---|---|---|---|
Stainless Steel Sanitary Bend Pipe | 250 | 12.93 | 13.21 |
Stainless Steel 180 Degree Bend, for Structure Pipe | 260/ Number | 13.45 | 13.74 |
GTMT SS Electropolished Bend, 1.5MM | 100/ Unit | 5.17 | 5.28 |
Stainless Steel Butt Weld Pipe Bend | 350/ Piece | 18.10 | 18.49 |
SS Long Bend for Railing, Size: 2 inch | 52/ Unit | 2.69 | 2.75 |
Stainless Steel Bend, Size: 3/4 & 1 inch | 200/ Unit | 10.34 | 10.57 |
Stainless Steel Solid Bend | 110/ Piece | 5.69 | 5.81 |
SS Pipe Bends Applications
- Utilities/power generation
- Marine
- Waste treatmen
- Pulp/paper
- Petroleum
- Chemical processing
- Textile
- Refining
- Gas compression and distribution industries
- Automotive
- Industrial equipment
16 Gauge Ss Bend Radius
Gauge | Stainless Steel Minimum Bend Radius Includes Minimum Closeness of Cutout to Bend |
Stainless Bend Radius (Refers to Inner Radius) |
11 gauge (0.120″ |3.05mm) | .5″ | .07″, .08″, .09″, .1″, .125″ |
14 gauge (0.075″ | 1.9 mm) | .275″ | .05″, .055″, .062″, .07″, .075″ |
.375″ | .07″, .105″ | |
.5″ | .09″, .11″, .115″, .12″ | |
1.375″ | .4″ | |
16 gauge (0.060″ | 1.52 mm) | .2″ | .035″, .05″ |
.265″ | .05″, .055″, .075″, .08″ | |
.375″ | .07″ | |
.5″ | .105″, .12″ | |
18 gauge (0.048″ | 1.22 mm) | .2″ | .04″, .045″, .05″ |
.265″ | .06″, .07″, .08″, .085″ | |
.375″ | .1″, .125″ | |
.5″ | .115″, .12″ | |
20 gauge (0.035″ | 0.89 mm) | .2″ | .05″ |
.265″ | .06″, .07″ | |
.375″ | .095″ | |
22 gauge (0.029″ | 0.74 mm) | .2″ | .05″ |
.265″ | .04″, .08″ | |
24 gauge (0.024″ | 0.61 mm) | .2″ | .04″ |
.265″ | .08″ |
Dimensions of Stainless Steel Tube Bend
Find you size in our online inventory of ASME B16.49 3D Bend and Astm B16.9 Piggable Bend in Mumbai at competitive pricing
- Long Radius Bend dimensions
- Short Radius Bend dimensions
- U Bend Pipe dimensions
- Miter Bend dimensions
- 3D Pipe Bend dimensions
- 5D Pipe Bend dimensions
- 10D Pipe Bend dimensions
- Return Bend dimensions
- 30 Degree Pipe Bend dimensions
- 60 Degree Pipe Bend dimensions
- 90 Degree Pipe Bend dimensions
- 180 Degree Return Bend dimensions
- 135 Degree Pipe Bend dimensions
- Hydraulic Tube Bends dimensions
- Fabricated Bends dimensions
- Mandrel Bends dimensions
- ISO 15590-1 Induction Bends dimensions
- 22D Pipe Bend dimensions
- Flange Bend dimensions
Standards of Stainless Steel Pipe Bends
ASME/ ANSI B16.49 | Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems |
---|---|
ASME B16.9 | Factory-Made Wrought Fittings Buttwelding |
ASTM A403 | ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
Stainless Tubing Bends ASME | ANSI B16.9, ANSI B16.28, MSS-SP-43 |
SS Bends DIN | DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 |
EN Pipe Bend, SS | EN10253-1, EN10253-2 |
ASME B16.25 | Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns |
MSS SP-43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications |
Delivery in following Countries
Our Delivery Schedule | Approximate Delivery Time(Days) | Client Reference |
---|---|---|
Indonesia | 20 |
|
Australia | 40 |
|
Singapore | 15 |
|
India | 7 |
|
Malaysia | 15 |
|
Kuwait | 12 |
|
United Arab Emirates (UAE) | 15 |
|
Germany | 32 |
|
Italy | 30 |
|
Qatar | 15 |
|
UK | 40 |
|
Dubai | 15 |
|
Oman | 12 |
|