ASTM A240 UNS S32760 Sheet and Super Duplex Plate Supplier in India
S32760 Sheet Suppliers produce this corrosion resistant super duplex grade plates in all sizes. The plates are manufactured as larger sheets for production ease and are stored as sheets. For customer needs, we cut them to sizes into plates. The Super Duplex 2507 Plate highly corrosion resistant due to the 25% chromium and 7% nickel content.
The reduced nickel content enables the materials to be resistant for most acidic environments. Great Steel & Metals can cover your super duplex plate needs. We offer a wide range of plate thicknesses and cut to sizes. Our UNS S32760 Strip can go along with the sheets for welding purposes. The strips are used in lining of the sheet material while welding. Strips can also be3 used individually in different applications. We provide our customers with ASTM A240 Type Super Duplex 2507 Sheet in approved standards and thicknesses. The manganese and nitrogen content along with the molybdenum content of the material provides the UNS S32750 Sheet with extra strength and resistance against most chloride ion rich environments. This quality makes the super duplex perforated sheet be used in sea water and marine applications as well. Our SA 240 GR 2507 Shim Sheet is also of superior quality and is used under similar conditions and environments. The Din 1.4410 Hot Rolled Plate is harder and stronger. Our range of products could be chosen for any application needs. We offer our customers with a full catalog to choose from.
Super Duplex 2507 Plate
ASTM A240 Type Super Duplex 2507 Sheet
UNS S32750 Coil
Table of contents
- Super Duplex Plate Specification
- Super Duplex 2507 Plate Supplier
- Alloy 2507 Perforated Sheet Types
- SAF 2507 Plate density
- UNS S32750 Coil melting range
- Super Duplex 2507 Plate Dimensions
- ASTM A240 UNS S32750 Sheet Weight Chart
- Super Duplex 2507 Plate Chemical Composition
- Mechanical Properties of UNS S32750 Coil
- ASTM A240 Type 2507 Super Duplex Plates Equivalent
- Heat treatment of 25cr Duplex Stainless Steel Plate
- UNS S32750 Coil Pitting Corrosion Resistance
- SA 240 GR 2507 Shim Sheet Crevice Corrosion Resistance
- Super Duplex Plate Acid Resistance Chart
- Super Duplex 2507 Sheet Temperature Tensile Properties
- Physical Propertries of 25cr SDSS Strip
- ASTM A240 UNS S32760 Plate Hardness
- Super Duplex 2507 Sheet Size Chart
- SDSS thickness tolerance chart
- SAF 2507 Sheet Tolerance Chart
- UNS S32750 Sheet cutting methods
- Features of Super Duplex Perforated Sheet
- Charpy impact test on Din 1.4410 Hot Rolled Plate
- Super Duplex Plate Hs Code
- ASTM A240 Type 2507 Plate Application
- SA 240 UNS S32750 Plate, Sheet, & Foil Difference
- Super Duplex Sheet Price list
Manufacturer of S32750 Super Duplex Plate and Coil in Hot and Cold Rolled Process
Super Duplex Plate Specification
Super Duplex 2507 Plate size
- Width: 900 to 2400 mm
- Length: up to 12000 mm
2507 stainless steel sheet thickness
- 5 to 100 mm
ASTM A240 Type 2507 Sheet Applications
- Water Waste Services
- Pressure vessels
- Nuclear sector
- Storage tanks
- Filters
- Heat exchangers
ASTM A240 UNS S32750 Perforated Sheet International standard
- ASME IID
- EN ISO 9445
- EN ISO 18286
- EN 10051
- EN 10088-1
- ISO 15510
- EN 10258
- DIN 59381
Density
- 7.8 g/cm3
Elongation
- 15 %
Bending method of ASTM A240 UNS S32760 Strip
- Press braking
- Rotary bending
- Roll bending
Werkstoff NR. 1.4410 perforated sheet manufacturing technique
- Hot Rolled
- Cold Rolled
Melting Point
- 1350 °C
- 2460 °F
SDSS Foil manufacturing technique
- Hot Rolled
- Cold Rolled
Tensile Strength
- 116000 Psi
- 800 Mpa
SAF 2507 2B finish sheet gauge stock
- 14 gauge
- 16 gauge
- 18 gauge
- 20 gauge
- 24 gauge
SDSS super duplex stainless clad plate certification
- MTC EN 10204 3.1/3.2
- 100% Radiography Test Report
- Raw Materials Certificate
- Origin Certificate
- Third Party Inspection Report
Super duplex alloy shim sheet packaging methods
- Big rolls
- Wooden boxes
- Bundles
- Pallets
- Crates
Stockist of Werkstoff Nr. 1.4410 Strips in Mumbai, Provide With Chemical, DT and NDT Test
SA240 Duplex 2507 cold rolled plate testing requirements
- UT testing
- PMI testing
- Packing Condition
- Visual Inspection
- Hardness Testing
- Dimension Verification
- Witnessed Chemical Analysis
ASTM A240 S32750 coil document we provided
- Heat No
- Packing List
- MTC
- Copy of Invoice
- Country of Origin
Yield Strength
- 80000 Psi
- 550 Mpa
Hardness
- HBW : 310
- HRB : 32
Super Duplex Stainless Steel Sheet value added services
- Polish
- Cutting
- Beveling
- Heat Treatment
- Annealing
- Forming
ASME SA240 S32760 cold rolled plate surface
- Black Surface
- Precision and bright
- Grounded
- Turned and Peeled
- Polished
Elastic Modulus
- 200 Gpa
Specific Heat
- 475 J/Kg.K
Heat treatment
- +A
- +NT
- +N
- +QT
- +AT
- +P
ASME SA240 S32760 perforated sheet forming
- Hot Forging
- Hot rolling process
Thermal Expansion
- 11.1 μm/m/°C
Thermal Conductivity
- 14.2 W/m.K
SS clad plate cutting methods
- Waterjet
- Laser
- Plasma
Werkstoff Nr. 1.4410 strips welding method
- Resistance welding
- TIG
- MIG
UNS 2507 Foil Hot Forming Temperature
- 1875°F to 2250°F
Solution annealing Temperature
- 1925°F
SAF 2507 hot rolled plate edges
- Round
- Broken corner
- Deburred
- V edge
- Slit
- Square
- Custom
2507 super duplex steel sheets supplier offers round and square edge
Alloy 2507 shim sheet origin
- Thailand
- Japanese
- Taiwan
- US
- Korea
- Indian
- European
UNS
- S32750 / S32760
WERKSTOFF NR.
- 1.4410
Hardness
- Half Hard
- Hard
- Quarter Hard
- Soft
- Spring Hard
Standard
- Guojia biaozhun
- American standard
- European standards
- German standard
- Japanese standards
UNS S32750 Equivalent Standards
- ASTM A240
- UNS S32750
- 1.4410
- X2 Cr Ni MoN 25.7.4
- Z3 CN 25.06 Az
- CE3MN
- Norsok MDS D57
saf 2507 material properties
- Magnetic Permeability : 33
- Electrical Resistance : 0.8 micro ohm.m
- Young’s Modulus : 199 kN/mm2
SA 240 S32750 plate types
- Super Duplex 2507 thin strips
- Alloy 2507 foil
- 2507 stainless steel coil
- ASTM A240 Type 2507 slitting coil
- Werkstoff NR. 1.4410 rolling sheets
- ASTM A240 UNS S32750 Polished plate
- ASTM A240 UNS S32760 strips
- SA 240 UNS S32760 profile
- ASTM A240 S32760 shims
- SDSS super duplex stainless polished plate
- Stainless steel super duplex cold rolled plate
- ASTM A240 S32750 hot rolled plate
- SA 240 UNS S32760 circle
- SAF 2507 chequered plate
- ASME SA240 S32750 shim stock
- ASME SA240 UNS S32760 perforated plate
- S32750 Steel clad plate
- ASME SA240 S32760 flat
- Super duplex alloy flat sheet
- ASME SA240 flat shim
- SDSS rolling plate
- Super duplex 1.4410 perforated sheet
- 25cr duplex blank
- 2507 stainless steel sheet
- SDSS 2507 sheets
- SA 240 S32760 sheet
Super Duplex 2507 Sheet Types
- BA
- sand blast
- Brushed finish
- NO.1
- 8K
- NO.8
- Mirror Finish
- 2D
- embossed
- NO.4
- Brush
- Checkered
- hair line
- etching
- 2B
2507 stainless steel coil suppliers stocks in BA, HL, 2B finish
Super Duplex 2507 Plate Supplier
Super Duplex 2507 Hot Rolled Plate
Alloy 2507 Plate
ASTM A240 Type 2507 Cold Rolled Plate
Super duplex 1.4410 flat shim
ASTM A240 UNS S32760 Flat Sheet
ASTM A240 UNS S32750 Polished Plate
Werkstoff NR. 1.4410 Cold Rolled Plate
25cr Super Duplex Coil
2507 super duplex stainless clad plate
SDSS 2507 Slitting Coil
ASTM A240 S32760 Thin Strips
SA 240 UNS S32750 Chequered Plate
2507 stainless steel foil
Super Duplex Stainless Steel Strip
SDSS Coil
SA 240 S32760 shim stock
Alloy 2507 Perforated Sheet Types
Super Duplex Round Hole Perforated Sheet
UNS S32750 Square Hole Perforated Sheet
ASTM A240 Type Super Duplex Slot Hole Perforated Sheet
Super Duplex 2507 Decorative Perforated Sheet
SA 240 GR 2507 Hexagonal Perforated Sheet
Din 1.4410 Oval Perforated Sheet
Super Duplex Oblong Hole Perforated Sheet
Saf 2507 Super Duplex Decorative Perforated Sheet
| Super duplex 2507 density | lb/in3 | 0.28 |
|---|---|---|
| Modulus of Elasticity | psi x 106 | 29 |
| Thermal Conductivity | Btu/h ft °F | 8.7 |
| Heat Capacity | Btu/lb/°F | 0.12 |
| Electrical Resistivity | W-in x 10-6 | 31.5 |
| Grade | Melting point |
|---|---|
| 2507 | 2460° F (1350° C) |
Super Duplex S32750 Perforated Sheet With Plasma and Waterjet Cutting at Best Price in India
$865.00/ Per Unit
800 X 1500 X 10 mm size
$193.00/ Per Unit
Hot rolled 600 mm width
$491.00/ Per Unit
UNS S32760 Sheet 20mm X 2000 X 5500mm
$361.00/ Per Unit
Astm A240 Type 2507 Super Duplex Plate 40 X 390 X 910mm
$505.00/ Per Unit
Din 1.4410 Hot Rolled Plate 8 X 1250 X 2000 Mm
$545.00/ Per Unit
SAF 2507 Plate 10 X 1250 X 6000 Mm
Super Duplex 2507 Plate Dimensions
Super Duplex UNS S32750 Plate Imperial Dimensions
| Width in Inch | Gauge in Inch |
|---|---|
| 72* | 10 To 24 |
| 48 | 13 To 29 |
| 48 | 18 To 28 |
| 60 | 12 To 24 |
| 60 | 11 To 24 |
Metric Dimensions of Super Duplex UNS S32750 Sheet
| Width in MM | Thickness in MM |
|---|---|
| 2032 | 0.25 To 8.0 |
| 1524 | 0.4 To 6.35 |
| 2032 | 0.4 To 8.0 |
| 1524 | 0.4 To 6.35 |
| 1524 | 0.25 To 3.5 |
| 1524 | 0.5 To 4.0 |
ASTM A240 UNS S32750 Sheet Weight Chart
| Nominal Size Thickness in Inch | Weight |
|---|---|
| 3/16 | 7.65 |
| 5/16 | 12.8 |
| 1/4 | 10.2 |
| 3/8 | 15.3 |
| 1/2 | 20.4 |
| 7/16 | 17.9 |
| 9/16 | 22.9 |
| 11/16 | 28.1 |
| 5/8 | 25.5 |
| 3/4 | 30.6 |
| 7/8 | 35.7 |
| 13/16 | 33.2 |
| 1 | 40.8 |
| 1 1/4 | 51.0 |
| 1 1/8 | 45.9 |
| 1 3/8 | 56.1 |
| 1 5/8 | 66.3 |
| 1 1/2 | 61.2 |
| 1 3/4 | 71.4 |
| 2 | 81.6 |
| 1 7/8 | 76.5 |
| 2 1/8 | 86.7 |
| 2 1/4 | 91.8 |
| 2 3/4 | 112 |
| 2 1/2 | 102 |
| 3 | 122 |
| 3 1/4 | 133 |
| 3 3/4 | 153 |
| 3 1/2 | 143 |
| 4 | 163 |
| 4 1/2 | 184 |
| 4 1/4 | 173 |
| 5 | 204 |
| 6 | 245 |
| 5 1/2 | 224 |
| 6 1/2 | 265 |
| 7 | 286 |
| 8 | 326 |
| 7 1/2 | 306 |
| 9 | 367 |
| 10 | 408 |
Super duplex steel 2507 plates exporter in India provide custom sizes and finish
Super Duplex 2507 Plate Chemical Composition
| Element | Carbon | Manganese | silicon | Phosphorus | sulfur | Chromium | Molybdenum | Nickel | Nitrogen | Iron |
| S32750 | 0.030 | 1.20 | 0.80 | 0.035 | 0.020 | 24 To 26 | 3 To 5 | 6 To 8 | 0.24 To 0.32 | 58.095 |
| S32760 | 0.05 | 1 | 1 | 0.030 | 0.010 | 24 To 26 | 3 To 4 | 6 To 8 | 0.20 To 0.30 | 57.61 |
Mechanical Properties of UNS S32750 Coil
| Grade | Application | Yield Strength, ksi Minimum | Corrosion Resistance | Tensile Strength, ksi | Limited temp | Hardness (HRB) Max. | % Elongation Min. |
|---|---|---|---|---|---|---|---|
| 2507 plate | Oil and gas industry, Offshore | 80 | highly resistant to formic & acetic acid | 116 | below 600° F | 310 | 15 |
ASTM A240 Type 2507 Super Duplex Plates Equivalent
| Grade | Japanese : JIS G4304 | American : ASTM A240 | European : EN 10088-2/10028-7 |
| Super Duplex 2507 | SUS327L1 | North America : UNS S32750 | DIN : 1.4410 |
Heat treatment of 25cr Duplex Stainless Steel Plate
| Grade | UNS No | Minimum Annealing Temp | |
| C | F | ||
| Super Duplex 2507 | S32750 | 1025 To 1125 | 1880 to 2060 |
| S32760 | 1100 | 2010 | |
| S32707 | 1080 to 1120 | 1975-2050 | |
UNS S32750 Coil Pitting Corrosion Resistance
SA 240 GR 2507 Shim Sheet Crevice Corrosion Resistance
| Alloy | Critical crevice corrosion temperature CCT (°C) |
| NAS329J3L | 25 |
| NAS74N | 45 |
| NAS64 | 30 |
Test solution: 6%FeCl3 + 1%HCl
Test time: 72h
Super Duplex Plate Acid Resistance Chart
Super Duplex 2507 Sheet Temperature Tensile Properties
| Temperature °F | 392 | 212 | 68 | 302 | 482 |
|---|---|---|---|---|---|
| Ultimate Tensile Strength | 95 | 101 | 116 | 98 | 94 |
| 0.2% Offset Yield Strength | 58 | 65 | 80 | 61 | 55 |
Physical Propertries of 25cr SDSS Strip
| Density | lb/in3 | 0.28 |
|---|---|---|
| Coefficient of Thermal Expansion 68 - 212 °C/°F |
x 10 To 6/°F | 7.2 |
| Modulus of Elasticity | psi * 106 | 29 |
| Heat Capacity | Btu/ lb/ °F | 0.12 |
| Thermal Conductivity | Btu/ h ft /°F | 8.7 |
| Electrical Resistivity | W-in * 10-6 | 31.5 |
2507 Stainless Steel Clad Plate Available in 0.3 to 1200 mm Thickness
Alloy 2507 Plate Thickness Chart
| In Milimeter | In Inch | In Milimeter | In Inch |
|---|---|---|---|
| 4.8 | 3/16 | 38.1 | 1 1/2 |
| 6.3 | 1/4 | 41.3 | 1 5/8 |
| 7.9 | 5/16 | 44.5 | 1 3/4 |
| 9.5 | 3/8 | 50.8 | 2 |
| 12.7 | 1/2 | 57.2 | 2 1/4 |
| 15.9 | 5/8 | 63.5 | 2 1/2 |
| 19 | 3/4 | 69.9 | 2 3/4 |
| 25.4 | 1 | 76.2 | 3 |
| 31.8 | 1 1/4 |
ASTM A240 UNS S32760 Plate Hardness
| Average (5) | HRC _ 20 | HB : 180 To 230 | HV10 180 To 230 |
Super Duplex 2507 Sheet Size Chart
| Size in inches | Size in |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
SDSS thickness tolerance chart
SAF 2507 Sheet Tolerance Chart
UNS S32750 Sheet cutting methods
- Oxy-fuel Cutting
- Plasma Cutting
- Laser Cutting
- Waterjet Cutting
Features of Super Duplex Perforated Sheet
- Good general corrosion resistance
- High Strength
- High resistance to chloride stress corrosion cracking
- Superior resistance to chloride pitting and crevice corrosion
- Low rate of thermal expansion
- Good weldability and workability
- Combination of properties given by austenitic and ferritic structure
- Suggested for applications up to 600° F
Charpy impact test on Din 1.4410 Hot Rolled Plate
| SDSS material code | Description |
|---|---|
| 73072900 | Super Duplex 2507 Plate |
ASTM A240 Type 2507 Plate Application
- Oil and gas industry equipment
- Marine Applications
- Flue Gas Scrubbing Equipment
- Offshore Oil production
- Pulp and Paper Mill Equipment
- Chemical process pressure vessels, piping and heat exchangers
- Desalination Equipment
SA 240 UNS S32750 Plate, Sheet, & Foil Difference
- If Thickness is less than 0.15 mm is called a Uns S32750 Foil.
- If Thickness is greater than 6.35 mm is called a Super Duplex 2507 Plate.
- If Thickness is greater than 0.15 mm and less than 6.35 mm is called a ASTM A240 Type 2507 Super Duplex Sheet.
