background

Waircom Pneumatic Components

ISO 6432 Pneumatic Cylinders and Stainless steel round cylinders distributor in India

Pneumatic components are part of pneumatic systems which is powered by compressed air or gas. The Waircom Pneumatic Components come in different types of cylinders, pistons that can be used for different industrial systems. The compressed air used in these systems allows them to have a replenishable supply. They are widely used in pressure vessels, gas compressors, cable-jetting, air brakes in automotive industries, etc. Pneumatic Cylinders are devices that use this compressed air in a linear or rotatory motion. These components can be provided with an infinite supply of air which can be temperature regulated for use in different systems. The Pneumatic Air Cylinder is non-flammable as the air is loaded safely. This invariably prevents any short circuits or explosions within the system. We are the leading waircom pneumatic cylinder distributors in Mumbai, India. We distribute the best products to different outlets in the country.

Waircom Pneumatic Components

Waircom Pneumatic Components

ISO 6432 Pneumatic Cylinders

ISO 6432 Pneumatic Cylinders

Stainless steel round cylinders

Stainless steel round cylinders

The ISO 6432 Pneumatic Cylinders are common cylinders that are used in pressure classes up to 1000Kpa. These cylinders allow air to be stored within the system in the seat tube feed. They are very durable and are easy to maintain. ISO 15552 Clean profile cylinders come in different sizes. These cylinders can be availed in both single and double-acting cylinders. They may also have a provision of magnetic sensors. The Round cylinders are preferably used in low-pressure systems. These cylinders can be availed either in magnetic or non-magnetic types. They come with adjustable cushioning at both ends of the cylinder. The Stainless steel round cylinders are highly resistant to corrosion and oxidation due to their superior chemical make-up. These cylinders can suffice in caustic, wash-down, and alkali systems. In the Twin rod cylinders, the piston end extends from both sides of the cylinder. This enables work to be done on both sides of the cylinder.

Tie rods cylinders are widely used in industrial automation. These high-performing cylinders can withstand extreme pressures and elevated temperatures. They are long-lasting and sustainable. The T- slots cylinders are fitted with sensors in the T cavity of the cylinder. These sensors help in detecting the piston position in different pneumatic drives. They are held strongly to the cylinder with the help of strong mounting. Pneumatic cylinders Fixings help fix all the cylinders to the industrial systems. Contact us to get a quote or know more about the products we distribute throughout the country.


Waircom Pneumatic Components Specification

Capacity 10 Bar
Port Size 1/8
Material Ms

Types of Waircom Pneumatic Components

waircom pneumatic cylinder

waircom pneumatic cylinder

Pneumatic Cylinders

Pneumatic Cylinders

Round cylinders

Round cylinders

ISO 15552 Clean profile cylinders

ISO 15552 Clean profile cylinders

T- slots cylinders

T- slots cylinders

Tie rods cylinders

Tie rods cylinders

Pneumatic cylinders Fixings

Pneumatic cylinders Fixings

Pneumatic Air Cylinder

Pneumatic Air Cylinder

SERIES U

Series U

SERIES U should comply with ISO 6432 standards. Basic version of SERIES U is available for all Diameter, the adjustable cushions versions and magnetic piston are produced in the range of Ø 16 to Ø 25.


SERIES XT

Series Xt

'Mickey mouse' profile with 'T'

SERIES XT are available in the bore from Ø 32 to Ø 100 and the barrel, It has two "T"-slot on one side where it is possible to mount magnetic sensors directly.

SERIES X

Series X

Clean profile cylinders

SERIES X cylinders comply with ISO 15552 standards

SERIES HB

Series Hb

Screwed-head cylinders

SERIES HB are manufactured to be fixed on machine edges without using of mountings. The end cap of SERIES HB acts as a mounting device in the various types such as: rear flange-mounted, hinge-mounted, feet-mounted, screw-mounted, front flange-mounted.

Series Abx

Series Abx

Stainless steel compact cylinders to ISO 21287 standard

SS compact cylinders series "ABX" comply with ISO 21287 standard and they are available from Ø20 to Ø100.

SERIES B

Series B

Compact cylinders

Cylinders series "B" are widely used in locking applications thanks to compact design and to easy mounting through holes on cylinder body.

SERIES Z

Series Z

Rodless cylinders

SERIES Z are suitable for applications where long strokes are required, they are designed with reduced overall dimensions if compared to the cylinders with external rod.

SERIES HS

Series Hs

Hydraulic speed regulators

Hydraulic regulators series "HS" assure a constant speed of pneumatic cylinders during their working cycle. In fact in the control of tools, that during their movements meet different resistances.

SERIES XL

Series Xl

Tie rods cylinders

SERIES XL comply with ISO 15552 standards, it is completely interchangeable with the former cylinders to VDMA 24562 / ISO 6431 standards.

SERIES: FM 157

Series: Fm 157

Magnetic sensors for cylinders series FM157

Magnetic sensors series "FM" allow to detect the magnetic piston position inside pneumatic cylinders. The magnetic field generated in the cylinder is used to signal electrical circuits as required.